This app note examines the theory of state-of-the-art spectrum analysis and describes how modern spectrum analyzers are designed and how they work. That is followed by a brief characterization of today's signal generators, which are needed as a stimulus when performing amplifier measurements.Read more
Looking to upgrade your Keithley SMU and have Keithley 2420 or a 2440 High Current SourceMeter SMU? Download the technical brief for 5 reasons you should switch to the 2460 or 2461. What if you have a 2410 SMU for High Voltage I-V Characterization download the technical brief for 5 reason you should switch to the 2470 SMU.Read more
This guide is designed to help you interface with your oscilloscope without needing to physically interact with the instrument after the initial setup. This document applies to most Tektronix oscilloscopes that do not have a PC operating system installed.Read more
This application note shows how a Remote Spectrum Monitor (MS2710xA) bundled with affordable add-ons, (Vision MX280001A software and/or TRX NEON Signal Mapper MS8100A) can provide modular, multi-channel radio frequency indoor/outdoor mapping solutions.Read more
This application note highlights how the Anritsu Field Master ProTM MS2090A facilitates the "over-the-air" (OTA) measurement of EIRP on active base stations using an accessory dual polarized waveguide antenna. Measurements are performed according to 3GPP specifications and are ideal for product design verification and field installations.
As 5G moves from a concept in the lab to deployment in the field, field engineers, technicians and installers are grappling with the many challenges of ensuring a successful deployment.
Test equipment requires upgrading to meet new requirements as operators migrate from CPRI/OBSAI MFH networks to the recently standardized 1914.3 (RoE) or eCPRI MFH networks.Read more
The probe’s 1:1 attenuation adds only 10 % to the noise of the oscilloscope – only about 120 μV on an R&S®RTO with 1 GHz bandwidth at 1 mV/divRead more