Welcome to our new website!

Metrology & Calibration

Items 61-75 of 157

Page
per page
Set Descending Direction
  1. C Series Temperature Input Module
    9213 16-CH TC, 24-BIT C SERIES MODULE
    780493-01

    The NI‑9213 is a high-density thermocouple input module that is designed for higher channel count systems. With this module, you can add thermocouples to mixed-signal test systems without taking up too many slots. The NI‑9213 includes anti-aliasing filters, open-thermocouple detection, and cold-junction compensation for high-accuracy thermocouple measurements. The NI‑9213 features NIST‑traceable calibration and a channel‑to‑earth ground double isolation barrier for safety, noise immunity, and high common-mode voltage range.  

    The NI‑9213 is a high-density thermocouple input module that is designed for higher channel count systems. With this module, you can add thermocouples to mixed-signal test systems without taking up too many slots. The NI‑9213 includes anti-aliasing filters, open-thermocouple detection, and cold-junction compensation for high-accuracy thermocouple measurements. The NI‑9213 features NIST‑traceable calibration and a channel‑to‑earth ground double isolation barrier for safety, noise immunity, and high common-mode voltage range.  

    Learn More
  2. C Series Universal Analog Input Module
    9219 4 CH-CH ISOLATED, 24-BIT, +/-60V, UNIVERSAL AI MODULE
    779781-01

    The NI‑9219 is designed for multipurpose testing. With the NI‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel.  

    The NI‑9219 is designed for multipurpose testing. With the NI‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel.  

    Learn More
  3. VirtualBench
    VirtualBench
    783555-05

    Five Benchtop Instruments. One Unified Interface. VirtualBench plays a key role in reducing the cost and footprint of test and measurement systems by consolidating five of the most commonly used instruments into one device without compromising the performance of each instrument. Combined with a modern software experience and simple programming interface, VirtualBench creates new efficiencies for engineers interacting with benchtop test equipment or developing low-cost automated test systems. The VirtualBench hardware family currently consists of three models most easily designated by oscilloscope analog bandwidth: 100, 350, and 500 MHz. These models allow the VirtualBench family to serve a wide range of applications and price points in academic labs, hardware characterization/debug benches, and automated test systems.

    Five Benchtop Instruments. One Unified Interface. VirtualBench plays a key role in reducing the cost and footprint of test and measurement systems by consolidating five of the most commonly used instruments into one device without compromising the performance of each instrument. Combined with a modern software experience and simple programming interface, VirtualBench creates new efficiencies for engineers interacting with benchtop test equipment or developing low-cost automated test systems. The VirtualBench hardware family currently consists of three models most easily designated by oscilloscope analog bandwidth: 100, 350, and 500 MHz. These models allow the VirtualBench family to serve a wide range of applications and price points in academic labs, hardware characterization/debug benches, and automated test systems.

    Learn More
  4. Multisim Education Single Seat
    Multisim Education Single Seat, Include 1 Year SSP
    779878-3501

    NI Multisim is an intuitive schematic capture and SPICE simulation circuit teaching environment. With specific Multisim features designed for the educator to foster learning and guide student exploration of circuit concepts, you can provide your students with an interactive environment to visualize circuit behavior with powerful simulation and analysis while abstracting the complexity of SPICE syntax. Learn about instrumentation and troubleshooting using simulation-driven instruments and hidden faults, and develop intuition by having students explore “what if” scenarios with interactive components and advance simulation.

    NI Multisim is an intuitive schematic capture and SPICE simulation circuit teaching environment. With specific Multisim features designed for the educator to foster learning and guide student exploration of circuit concepts, you can provide your students with an interactive environment to visualize circuit behavior with powerful simulation and analysis while abstracting the complexity of SPICE syntax. Learn about instrumentation and troubleshooting using simulation-driven instruments and hidden faults, and develop intuition by having students explore “what if” scenarios with interactive components and advance simulation.

    Learn More
  5. NI Digital Communications Teaching Bundle
    Digital Communications Teaching Bundle
    781908-01

    The Digital Communications Teaching bundle provides relevant, hands-on laboratory learning in RF and communications as an affordable teaching solution. The NI USRP hardware and LabVIEW software combination offers students a unique and relevant opportunity to experiment with a wide range of real-world signals in introductory communications and digital communications laboratories. With this solution, students can focus on the practical implementation of theoretical algorithms and real-world impairments earlier in the curriculum. This includes ready-to-teach digital communications courseware by Professor Robert W. Heather Jr., Ph.D., P.E., transmit/recieve pair of NI USRP-2920 (50MHz to 2.2GHz), covers FM radio, GPS, GSM, radar, and ISM bands, and includes NI technical support and 1-year extendable warranty.

    The Digital Communications Teaching bundle provides relevant, hands-on laboratory learning in RF and communications as an affordable teaching solution. The NI USRP hardware and LabVIEW software combination offers students a unique and relevant opportunity to experiment with a wide range of real-world signals in introductory communications and digital communications laboratories. With this solution, students can focus on the practical implementation of theoretical algorithms and real-world impairments earlier in the curriculum. This includes ready-to-teach digital communications courseware by Professor Robert W. Heather Jr., Ph.D., P.E., transmit/recieve pair of NI USRP-2920 (50MHz to 2.2GHz), covers FM radio, GPS, GSM, radar, and ISM bands, and includes NI technical support and 1-year extendable warranty.

    Learn More
  6. myRIO Starter Kit 1
    myDAQ Intro to Engineering Bundle
    785771-01

    The myDAQ Intro to Engineering Bundle combines myDAQ with the NI Starter Accessory Kit to provide projects and labs designed to engage engineering students from the start. Combining myDAQ with Intro to Engineering lab material in DAQExpress gives educators a complete solution to teach a project-based introduction to an engineering class. Topics covered in the course include basic data acquisition, fundamentals of analog and digital input and output, sensor and actuator interfacing, and programming and basic control fundamentals.

    The myDAQ Intro to Engineering Bundle combines myDAQ with the NI Starter Accessory Kit to provide projects and labs designed to engage engineering students from the start. Combining myDAQ with Intro to Engineering lab material in DAQExpress gives educators a complete solution to teach a project-based introduction to an engineering class. Topics covered in the course include basic data acquisition, fundamentals of analog and digital input and output, sensor and actuator interfacing, and programming and basic control fundamentals.

    Learn More
  7. myDAQ
    myDAQ
    781326-01

    myDAQ combines a comprehensive set of plug-and-play computer-based lab instruments with portability for hands-on student learning in or outside the lab. myDAQ Student Data Acquisition Devices feature eight commonly used plug-and-play computer-based lab instruments based on LabVIEW, including a digital multimeter (DMM), oscilloscope, and function generator. Students can access all the ready-to-run software instruments to perform experiments and exercises with the Bode analyzer, arbitrary waveform generator, dynamic signal analyzer (fast Fourier transform), digital input, and digital output. These affordable devices allow for real engineering and, when combined with LabVIEW and NI Multisim software, give students the power to prototype systems and analyze circuits outside traditional lectures and labs.

    myDAQ combines a comprehensive set of plug-and-play computer-based lab instruments with portability for hands-on student learning in or outside the lab. myDAQ Student Data Acquisition Devices feature eight commonly used plug-and-play computer-based lab instruments based on LabVIEW, including a digital multimeter (DMM), oscilloscope, and function generator. Students can access all the ready-to-run software instruments to perform experiments and exercises with the Bode analyzer, arbitrary waveform generator, dynamic signal analyzer (fast Fourier transform), digital input, and digital output. These affordable devices allow for real engineering and, when combined with LabVIEW and NI Multisim software, give students the power to prototype systems and analyze circuits outside traditional lectures and labs.

    Learn More
  8. myRIO Starter Kit
    myRIO Kits: Starter Kit
    783068-01

    Common sensors and components for NI Student projects for use with NI myRIO

    Common sensors and components for NI Student projects for use with NI myRIO

    Learn More
  9. NI myRIO
    myRIO (For Academic Customers Only)
    782692-01

    Provides reconfigurable I/O that allows you to teach and implement multiple design concepts with one device. The myRIO Student Embedded Device features I/O on both sides of the device in the form of MXP and MSP connectors. It includes analog inputs, analog outputs, digital I/O lines, LEDs, a push button, an onboard accelerometer, a Xilinx FPGA, and a dual‐core ARM Cortex‐A9 processor. Some models also include WiFi support. You can program the myRIO Student Embedded Device with LabVIEW or C. With its onboard devices, seamless software experience, and library of courseware and tutorials, the myRIO Student Embedded Device provides an affordable tool for students and educators.

    Provides reconfigurable I/O that allows you to teach and implement multiple design concepts with one device. The myRIO Student Embedded Device features I/O on both sides of the device in the form of MXP and MSP connectors. It includes analog inputs, analog outputs, digital I/O lines, LEDs, a push button, an onboard accelerometer, a Xilinx FPGA, and a dual‐core ARM Cortex‐A9 processor. Some models also include WiFi support. You can program the myRIO Student Embedded Device with LabVIEW or C. With its onboard devices, seamless software experience, and library of courseware and tutorials, the myRIO Student Embedded Device provides an affordable tool for students and educators.

    Learn More
  10. 4 1
    ELVIS II+
    780381-02

    The NI ELVIS Engineering Lab Workstation provides a comprehensive teaching solution for engaging students in hands-on labs involving analog circuits, mechatronics, power electronics, instrumentation, digital communications, digital electronics, controls, and more. Each laboratory solution includes lab material and complete experiments, so students can explore theory in the physical laboratory with a safe, in-depth experience. With its hands-on approach, NI ELVIS helps educators teach students practical, experimental engineering skills. It includes 12 software-based virtual instruments including an oscilloscope, digital multimeter, function generator, variable power supply, Bode analyzer. You can connect a PC to NI ELVIS using USB and build circuits on its detachable protoboard. • Software—includes interactive soft front panels for all instruments, full integration with Multisim, API support for LabVIEW and text-based languages, shipping examples, and detailed help files • Seven hardware instruments and 11 software-defined instruments • Up to 100 MS/s scope sample rate with 8-bit resolution • 51⁄2-digit digital multimeter with up to 60 V DC and 20 V RMS limits • 16 analog input channels with 16-bit resolution • 24 DIO and 15 PFI lines individually programmable as input or output

    The NI ELVIS Engineering Lab Workstation provides a comprehensive teaching solution for engaging students in hands-on labs involving analog circuits, mechatronics, power electronics, instrumentation, digital communications, digital electronics, controls, and more. Each laboratory solution includes lab material and complete experiments, so students can explore theory in the physical laboratory with a safe, in-depth experience. With its hands-on approach, NI ELVIS helps educators teach students practical, experimental engineering skills. It includes 12 software-based virtual instruments including an oscilloscope, digital multimeter, function generator, variable power supply, Bode analyzer. You can connect a PC to NI ELVIS using USB and build circuits on its detachable protoboard. • Software—includes interactive soft front panels for all instruments, full integration with Multisim, API support for LabVIEW and text-based languages, shipping examples, and detailed help files • Seven hardware instruments and 11 software-defined instruments • Up to 100 MS/s scope sample rate with 8-bit resolution • 51⁄2-digit digital multimeter with up to 60 V DC and 20 V RMS limits • 16 analog input channels with 16-bit resolution • 24 DIO and 15 PFI lines individually programmable as input or output

    Learn More
  11. fc 5128a 12b c
    5128A
    FLU-5128A-A-0

    RHapid-Cal® Humidity Generator

    RHapid-Cal® Humidity Generator

    Learn More
  12. voltage reference standard fc 732c 01a ko 1 1
    732C
    FLU-732C-A-0

    DC Voltage Reference Standard

    DC Voltage Reference Standard

    Learn More
  13. voltage reference standard fc 732c 01a ko 1
    734C
    FLU-734C-A-0

    DC Voltage Reference Standard

    DC Voltage Reference Standard

    Learn More
  14. untitled 2
    5322A
    FLU-5322A-A-0

    Electrical Safety Tester Calibrator. The 5322A replaces the 5320A Electrical Tester Calibrator.

    Electrical Safety Tester Calibrator. The 5322A replaces the 5320A Electrical Tester Calibrator.

    Learn More
  15. 5790b
    5790B
    FLUK-5790B-A-0

    5790B AC Measurement Standard

    5790B AC Measurement Standard

    Learn More

Items 61-75 of 157

Page
per page
Set Descending Direction
© Testforce Systems Inc. 2022. All Rights Reserved.