Welcome to Testforce Compliance & Connectivity, the new home of Teledyne Lecroy, Ametek CTS, Anritsu and more!

Search Site

Elektro-Automatik EL 9000B HP 2U Series

  • High-performance FPGA (Field-Programmable-Gate-Array Lattice ECP3LFE17EA) allowing complex control settings and operations, up to 10 times faster programming-reaction time. Bandwidth for U, I, P and R measurements = 1 MHz for all signals at once

  • Highly isolated structure, therefore much less sensitive against disturbances under operation (higher immunity, higher reliability)

  • EMI compliant to EN 61000-6-3, EN 55022 class B (meets EMI requirement for residential-, commercial- and light-industrial environment)

  • Active suppression in the DC-input circuit, oscillations typically caused by long DC leads or unexpected impedances by the DC source connected are significantly reduced.

  • Thermal management, if subject to an overheating condition, no unit will be “hard” switched off but softly be de-rating down to the minimum (e.g. 0W).

  • Input-filter protection circuit, preventing damage caused by DC voltage applied that may have a high-frequency AC part.

  • Standard on-board 2-way Interface: Analogue 0-5V/0-10V and USB (all galvanically isolated) as well as intelligent Slot, enables users to retrofit manifold digital interfaces (such as CAN, CANopen, Ethernet, Devicenet, Modbus, Profibus/net and more) at any time.

  • Share-bus function in connection with laboratory power supplies series PS and PSI 9000 2U and 3U, to form e.g. a source-sink/2Q solution.

  • TFT Touch Display with 64.000 colours with integrated comfortable function generator (default waveforms: sinus, triangle, rectangular, trapezoid, DIN 40838/car, arbitrary, ramp, IU/IU) as well as alarm manager

  • Summary function in master-slave parallel operation, equal power-sharing/load distribution

  • User-calibration function: Upon a local servicing/repair, the user may measure the deviation values himself and key in the correction values into the menu to restore ex-factory precision

  • High resolution of up to 16 Bit (very fine programming and read-back steps)

  • Voltage accuracy 0.1% of nominal

  • Professional user control software for up to 20 devices (license fee applies)

  • Safety compliant to IEC/EN 61010

Add Items to Cart



Specifications

Wide AC supply for 90...246 V

Various power ratings

Voltages: 80 V, 200 V, 360 V, 500 V, 750 V

Currents of up to 3060 A

Pre-configured, pre-wired, ready to be installed

Based on electronic loads of series EA-EL 9000 B 3U with:

True function generator

USB and analog interface built in

Slot for optional interface modules Profinet,

Profibus, CAN, CANopen, RS232, Ethernet, Mod-Bus TCP

Support for SCPI and ModBus commands

Colour TFT touch panel

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.